Shock Proof Geyser Heating Element ( Set of 2) 1000 Watt Heavy Duty Heating Element Compatible with Venus & Porcelain Water Heater Ceramic Insulated Geyser Heater Element Long Life Heating Element

Step 1 – Switch OFF Power Switch OFF the geyser and disconnect it completely from the electrical supply. Ensure there is no electrical power before beginning installation. Step 2 – Drain the Geyser Turn OFF the water supply and drain the water from the geyser completely. Allow the water to cool before starting the replacement. Step 3 – Open the Geyser Remove the appropriate cover/flange assembly to access the existing heating elements. Step 4 – Disconnect the Wiring Carefully disconnect the electrical wires from the old heating elements. Take a photograph of the wiring before disconnecting. Step 5 – Remove the Old Elements Remove the mounting hardware and carefully take out the old heating elements. Step 6 – Install the New Elements Install both new Technovate heating elements in the correct position. Make sure the sealing/gasket is properly positioned to prevent water leakage. Step 7 – Reconnect the Wiring Reconnect the wires securely according to the original wiring arrangement and electrical specifications. Do not rely only on wire colour. Step 8 – Check for Leakage Close the geyser assembly and fill the tank with water. Check carefully for any water leakage around the heating element mounting area. Step 9 – Switch ON Power Only after confirming that the tank is completely filled with water and there is no leakage, restore the electrical supply. Step 10 – Test Heating Check that the geyser heats the water properly and that the thermostat and safety devices operate correctly. Safety Warning: Never switch ON a geyser heating element when the tank is empty. Dry operation can damage the heating element and may create a safety hazard. Installation should be performed by a qualified electrician or geyser technician.