Technovate Flaring Tool Set for Copper Pipes Flaring Bar with Flaring Yoke 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" & 5/8" Copper Tube Sizes AC, HVAC & Refrigeration Tool Heavy Duty

Cut the Copper Pipe: Cut the copper tube to the required length using a suitable tube cutter. Deburr the Pipe: Remove burrs from the inside and outside of the cut end. Keep the pipe end clean and round. Select the Correct Opening: Choose the flaring bar hole corresponding to the copper pipe size. Insert the Copper Pipe: Place the pipe into the correct opening and allow the required amount of pipe to extend above the flaring bar. Secure the Pipe: Tighten the flaring bar firmly so the copper pipe cannot move during flaring. Position the Yoke: Place the flaring yoke over the flaring bar and align the cone with the centre of the copper pipe. Create the Flare: Turn the yoke handle gradually to press the cone into the copper pipe and form the flare. Check the Flare: Release the yoke and inspect the flare. It should be even, smooth and free from cracks or deformation. Make the Connection: Fit the flared copper pipe with the appropriate flare nut and tighten according to the equipment manufacturer's specifications. Important: Always select the correct pipe-size opening. Do not overtighten the yoke, as excessive pressure may damage or split the copper pipe.