Technovate Refrigerator Compressor Relay & OLP Overload Protector 220V 1/6 HP Universal Refrigerator Compressor Starting Relay & Overload Protector OEM Quality 1 Year Warranty

Important: Installation should be performed by a qualified refrigerator technician. Disconnect the refrigerator from the power supply before starting. Switch OFF & Unplug Turn off the refrigerator and disconnect the power plug. Allow the compressor to cool before installation. Access the Compressor Remove the rear service cover to access the compressor terminals and existing relay/OLP. Remove the Old Relay & OLP Carefully disconnect the existing relay and overload protector from the compressor terminals. Note the original terminal positions before removal. Check Compatibility Confirm that the new relay and OLP match the compressor's voltage, HP rating, terminal arrangement and specifications. Install the OLP Fit the overload protector securely onto the appropriate compressor terminal according to the original configuration. Install the Relay Push the compressor relay firmly onto the corresponding compressor terminals. Ensure it is properly seated and secure. Reconnect the Wires Reconnect the wires exactly according to the original wiring configuration or compressor manufacturer's wiring diagram. Make sure all connections are tight. Check the Installation Ensure there are no loose wires, exposed terminals, damaged connectors or incorrect connections. Test the Refrigerator Restore power and switch on the refrigerator. Check that the compressor starts normally and operates smoothly without unusual noise or repeated tripping. Safety Note Do not change the wiring configuration based only on the product appearance. Incorrect wiring can damage the compressor or create an electrical hazard. If you are unsure about the terminal configuration, consult a qualified refrigerator technician.